JuiceGoose iP 1520 - Manual (Page 3)

QUICKSTART GUIDE
1. Unbox the unit. The box should contain: iP1520, manual, warranty card
and Juice Goose promotional material. You will need a CAT5 network ca-
ble if attaching to a router, a CAT 5/6 crossover cable if connecting directly
to a PC and a custom RS232 cable if you wish do connect via RS232 (see
page 13 for a diagram on how to build the RS232 cable).
2. With your PC on and booted up, connect the iP1520 to your router or PC
using a suitable cable. If the iP1520 is connected to a network router use a
standard CAT 5 cable, if connected directly to a PC use a CAT 5/6 cross-
over cable.
3. Plug the iP1520 power cord into a live AC receptacle, such as a wall
outlet, with a twenty amp capacity (i.e. NEMA 5-20R).
4. The iP1520 will take about 30 seconds to boot up and configure itself at
which point the Network light on the front of the unit will illuminate, indicat-
ing network connectivity. If the Network light blinks or does not light at all
check the cable connections.
5. Open up your web browser and type in the following default IP address
to access the iP1520 : http://juicegoose.
6. At this point you will be prompted to log into the iP1520.
Initial login will be:
Username: admin
Password: juicegoose
7. You will be presented with the control section where you can control the
iP1520 PODS by clicking on the buttons or using the Sequence field by
entering the value in seconds and clicking the Sequence UP button.
8. To setup a specific IP address, change passwords for the admin/user
account or configure other advanced features of the iP1520 click on the
‘iP1520 Management’ link at the top right of the displayed page. You will
need to be logged in as admin to access this section. This section is de-
scribed in more detail beginning on page 6.
See your system administrator, if you have one, for help with configuration.
Page 2