JuiceGoose iP 1520 - Manual (Page 17)

To connect to IP1520 over TCP, simply start your TCP client program ( such as
Hercules or PuTTY) and specify the IP address of the iP1520 and the TCP port.
Start the connection ( many programs have a Connect button to start the con-
nection ) and type iP1520 console commands such as Help. You should see
the reply to the command on the TCP client terminal window. See page 13 and
14 of this manual for a full list of the console commands available.
Instead of a dedicated client program, it is also possible to use Telnet command
to establish the connection. For example, from Windows command prompt,
type:
telnet <IP Address> <Port>
where <IP Address> is the address of the iP1520 to connect and <Port> is the
TCP port to use.
Example: telnet 192.168.1.22 33333
Note: If there is no activity on the console for 10 minutes the TCP connection
will be closed automatically.
Page 16