JuiceGoose iP 1520 - Manual (Page 7)

point the Network light on the front of the unit should illuminate and remain on
without blinking, indicating network connectivity. If the Network light blinks
check the cable connections.
4. In Windows go to your start menu and navigate to the control panel. Then
choose the Network Connections” icon.
5. Open Network connections by double clicking on it, select the LAN or HIGH-
SPEED icon, right click on this and select properties.
6. Click once on the Internet Protocol item that you will see at the bottom of the
list and select the properties button which is at the mid right.
7. Check the “Use the following IP address” box and then change the IP ad-
dress to: 192.168.1.1, then change the Default Gateway address also to:
192.168.1.1.
8. Click OK and then close the network box.
9. Open a web browser on your PC and type in the following address on the
navigation bar to access the iP1520: 192.168.1.77.
10. The iP1520 login box will appear, enter your login details and operate the
iP1520.
You can also configure the required IP address and any network/RS232 set-
tings you require using the RS232 connection. See page 14 for detailed RS232
commands and setup requirements.
Page 6