KB Electronics Multi Speed Board - Manual (Page 3)

1
Definition of Safety Warning Symbols
Electrical Hazard Warning Symbol – Failure to observe this warning could result in
electrical shock or electrocution.
Operational Hazard Warning Symbol – Failure to observe this warning could result
in serious injury or death.
i. SAFETY WARNING
!
This product should be installed and serviced by a qualified technician, electrician, or
electrical maintenance person familiar with its operation and the hazards involved.
Proper installation, which includes wiring, mounting in proper enclosure, fusing or other over cur-
rent protection, and grounding can reduce the chance of electrical shocks, fires, or explosion in this
product or products used with this product, such as electric motors, switches, coils, solenoids,
and/or relays. Eye protection must be worn and insulated adjustment tools must be used when
working with control under power. This product is constructed of materials (plastics, metals, car-
bon, silicon, etc.) which may be a potential hazard. Proper shielding, grounding, and filtering of this
product can reduce the emission of radio frequency interference (RFI) which may adversely affect
sensitive electronic equipment. If further information is required on this product, contact the Sales
Department. It is the responsibility of the equipment manufacturer and individual installer to supply
this Safety Warning to the ultimate end user of this product. (SW effective 11/1992).
!
This product complies with all CE directives pertinent at the time of manufacture.
Contact the Sales Department for Declaration of Conformity.