LEESON Micro Series Remote Keypad Kit - Manual (Page 2)

MICRO SERIES DRIVE WITH COVER, KEYPAD, AND LCD DISPLAY REMOVED
MICRO SERIES REMOTE KEYPAD CUTOUT DIMENSIONS
P8
P5
PL4
L1 L2 L3 T1 T2 T3
CONTROL BOARD
(9933A-XXX or 9019-XXX)
STANDOFF HOLES
(ONE AT EACH CORNER)
CONTROL TERMINALS
DC BUS CAPACITORS
LOCATION OF THE LCD DISPLAY
ASSEMBLY. REMOVE AND
REPLACE WITH THE REMOTE
INTERFACE BOARD
LOCATION OF THE KEYPAD
ASSEMBLY. REMOVE ASSEMBLY
AND UNPLUG KEYPAD FROM PL4
NOTE: If the Control Board does not
have a P8 socket, please contact
LEESON. A new control board will
need to be purchased and installed
prior to installing the Remote Keypad.
CUT
OUT
4.50"
3.25"
MOUNTING HOLES - 3/16"
MOUNTING HOLES - 3/16"
5.50" 4.25"
0.625"
2.50"
0.625"
REMOTE KEYPAD OUTLINE
2.125"
3.375"
LEESON Electric LEESON Electric LEESON Electric LEESON Electric LEESON Electric • 2100 Washington St. • Grafton, WI 53024 • Ph: (262) 377-8810 • Fax: (262) 377-9025 • www.leeson.com