LevelOne WBR-6805 - Manual (Page 21)

21
Note: This function only support in Router & AP mode, not support in
Client mode.
Wireless Mode
In the drop list, there are two types of wireless mode: “AP” and “Client”.
You may select one type for your configuration.
Note: This fuction only support in AP mode.
SSID
Service set identifier (SSID) for the name of the wireless network. In
Client Mode, this SSID is used for setting Virtual AP's name.
Channel Width
Select 20MHz or 40MHz (40MHz only support in 11n mode) as the
wireless channel frequency.
Channel Number Select a channel for the wireless network of this device.
Country
It contains USA(FCC), Canada(IC), Europe(ETSI), Spain, France,
Japan(MKK) for your selection.
Broadcast SSID
If you enable "Broadcast SSID", every wireless station located within the
coverage of this wireless router can discover this wireless router easily.
If you are building a public wireless network, enabling this feature is
recommended. Disabling "Broadcast SSID" can be more safe.
Associated
Client
Click "Show Active Clients" button, then an "Active Wireless Client
Table" will pop up. You can see the status of all active wireless stations
that are connecting to the access point.
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
1. Multiple APs
This is the window that pops up after clicking the button.