LevelOne WBR-6805 - Manual (Page 34)

34
the case of the router. After click on the button, please run the client’s
WPS and push the PBC button within 2 minutes.
Current Key Info This field displays the current key information you configured.
Client PIN
Number
Personal Identification Number (PIN) method. Users have to fill in the
PIN code of enrollee device and click the button to make
communication between the AP and the enrollee device. After click
on the button, please run the client’s WPS and push the PIN button
within 2 minutes.
*Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
If you are under the Wireless Client mode, the interface is different.
Click Wireless > WPS in the menu links to display the screen as shown below.
In this page you can connect your device to other networks by using PIN or PBC methods
.
Items Information
Disable WPS Mark to disable the WPS, and clear to enable.
Self-PIN Number
If you use this device as a client, you can use this code
when trying to connect this device to other AP by using
the PIN method.
PIN Configuration
After the AP or router you share has fill in your self-pin
number and click the button in this GUI page
at this moment you can click the button in 2
minutes to establish the connection.
Push Button Configuration
You can simply click the button (or the WPS
button) together with the AP or router you want share in 2
minutes for connection.