LevelOne WBR-6805 - Manual (Page 23)

23
3.4.2 Advanced Settings
You can set advanced wireless LAN parameters for this router. We recommend not changing
these parameters unless you know what changes will be on this router.
Items Information
Fragment
Threshold
This value should remain at its default setting of 2346. If you experience a
high packet error rate, you may slightly increase your fragmentation
threshold within the value range of 256 to 2346. Setting the fragmentation
threshold too low may result in poor performance.
RTS Threshold
Request To Send threshold. This value should remain at its default
setting of 2347. If you encounter inconsistent data flow, only minor
modifications to the value range between 0 and 2347 are recommended.
Beacon Interval
Beacons are packets sent by an access point to synchronize a wireless
network. Specify a beacon interval value. Default (100ms) is
recommended.
Preamble Type
The length of CRC blocks in the frames during the wireless
communication.
RF Output
Power Select the signal strength for the wireless network.
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.