LevelOne FBR-1461 - Manual (Page 16)

16
Chapter 3 - Installation
You can configure the FBR-1461 router through the convenient and user-friendly interface of
a web browser. Most popular operating systems such as Linux and Windows
98/NT/2000/XP/Vista include a web browser as a standard application.
Before Configuration
PCs must have a properly installed Ethernet interface which connects to the router directly
or through an external repeater hub. In addition, PCs must have TCP/IP installed and
configured to obtain an IP address through a DHCP server or a fixed IP address that must be
in the same subnet as the router. The default IP address of the router is 192.168.0.1 and the
subnet mask is 255.255.255.0 (i.e. any attached PC must be in the same subnet, and have
an IP address in the range between 192.168.0.2 and 192.168.0.254). The easiest way is to
configure the PC is to obtain an IP address automatically from the router using DHCP. If you
encounter any problems accessing the router‟s web interface you are advised to uninstall
any kind of software firewall on your PCs, as they can cause problems when trying to access
the 192.168.0.1 IP address of the router.
Please follow the steps below for installation on your PC‟s network environment. First of all,
check your PC‟s network components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to your Windows-related or other operating
system manuals.
Note: Any TCP/IP capable workstation can be used to communicate with or through the
FBR- 1461. To configure other types of workstations, please consult the manufacturer‟s
documentation.