LevelOne FBR-1461 - Manual (Page 42)

42
Ethernet
The router supports more than one Ethernet IP addresses in the LAN, and with distinct
LAN subnets through which you can access the Internet at the same time. Users usually
only have one subnet in their LAN. The default IP address for the router is 192.168.0.1.

IP Address: The LAN IP address of this router.

Netmask: The LAN subnet mask of this router.

RIP: RIP v1, RIP v2 Broadcast, RIP v2 Multicast and RIP v1+v2 Broadcast.
IP Alias
This function allows the creation of multiple virtual IP interfaces on this router. It helps to
connect two or more local networks to the ISP or remote node. In this case, an internal
router is not required.
You can set up to five IP Alias‟s.

IP Address: Specify an IP address on this virtual interface.

Netmask: Specify a subnet mask on this virtual interface.