LevelOne FBR-1461 - Manual (Page 21)

21
Factory Default Settings
Before configuring the FBR-1461 router, you need to know the following default settings.
Web Interface: (Username and Password)
Username: admin
Password: password
The default username and password are “admin” and “password” respectively.
Attention :
If you ever forget the username/password to login to the router, you may press the RESET
button up to 6 seconds then release it to restore the factory default settings.
Caution: After pressing the RESET button for more than 6 seconds then release it, to be sure you power cycle
the device again.
LAN Device IP Settings:
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
ISP setting in WAN site:
PPPoE
DHCP Server:
DHCP server is enabled.
Start IP Address: 192.168.0.2
IP pool counts: 253