LevelOne GES-1651 User Manual
Page 49
43
Figure 6-4 Create or Modify 802.1Q VLAN
The following entries are displayed on this screen:
VLAN Config
VLAN ID:
Enter the ID number of VLAN.
Description:
Give a description to the VLAN for identification.
Check:
Click the Check button to check whether the VLAN ID you entered
is valid or not.
VLAN Members
Port Select:
Click the Select button to quick-select the corresponding entry
based on the port number you entered.
Select:
Select the desired port to be a member of VLAN or leave it blank.
It's multi-optional.
Port:
Displays the port number.
Link Type:
Displays the Link Type of the port. It can be reset on Port Config
screen.
Egress Rule:
Select the Egress Rule for the VLAN port member. The default
egress rule is UNTAG.
TAG: All packets forwarded by the port are tagged. The
packets contain VLAN information.
UNTAG: Packets forwarded by the port are untagged.