LevelOne GES-1651 User Manual
Page 98
92
Port Select:
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select:
Select the desired port for Storm Control configuration. It is
multi-optional.
Port:
Displays the port number of the switch.
Broadcast:
Select Enable/Disable to enable/disable the broadcast control
function for the port.
Multicast:
Select Enable/Disable to enable/disable the multicast control
function for the port.
UL-Frame:
Select Enable/Disable to enable/disable the UL-Frame control
function for the port.
Rate(bps):
Select the bandwidth for receiving broadcast packets,multicast
packets and UL-Frame on the port. The packet traffic exceeding
the bandwidth will be discarded.
LAG:
Displays the LAG number which the port belongs to.
Note:
If you enable storm control feature for the ingress rate limit-enabled port, ingress rate limit feature
will be disabled for this port.