LevelOne GES-1652 - Manual (Page 28)

Web Smart Switch
28
The following table describes the labels in this screen.
LABEL DESCRIPTION
Mode Select Static from the drop-down box if you don’t have a DHCP server or if
you wish to assign static IP address information to the switch. You need to fill
in the following fields when you select this option.
Select DHCP option if you have a DHCP server that can assign the switch an
IP address, subnet mask and a gateway IP address automatically.
IP Address Enter the IP address of your switch in dotted decimal notation for example
192.168.1.1. If static mode is enabled, enter IP address in this field.
Subnet Mask Enter the IP subnet mask of your switch in dotted decimal notation for
example 255.255.255.0. If static mode is enabled, enter subnet mask in this
field.
Gateway Enter the IP address of the gateway in dotted decimal notation. If static mode
is enabled, enter gateway address in this field.
Apply Click Apply to save your changes to the switch.
3.2.2 IPv6 Address
Click Network> IPv6 Address in the navigation panel to display the screen as shown below.