LevelOne GES-1652 - Manual (Page 39)

Web Smart Switch
39
3.3.4.4 VLAN Ingress Filter
This page allow user to configure VLAN ingress filter setting.
Click Switching > VLAN > VLAN Ingress Filter to access the screen below.
The following table describes the labels in this screen.
LABEL DESCRIPTION
State Select Enabled from the drop down box to enable VLAN Ingress Filter.
Select Disabled to not to use VLAN Ingress Filter.
Apply Click Apply to save your changes to the switch.
3.3.5 SVLAN
3.3.5.1 SVLAN Setting
This page allow user to configure VLAN stacking tag protocol identifier.
Click Switching->SVLAN->SVLAN Setting to access the screen below.