LevelOne GES-1652 - Manual (Page 42)

Web Smart Switch
42
Click Switching->SVLAN->SVLAN Service Port to access the screen below.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Port Select the port(s) to configure this settings for.
Enabled Set VLAN stacking aware state:
 Enabled: Set as VLAN stacking aware.
 Disabled: Set as VLAN stacking unaware.
Apply Click Apply to save your changes to the switch.
3.3.6 Bandwidth Control
3.3.6.1 Preamble Setting
Click Switching > Bandwidth Control->Preamble Setting in the navigation panel to bring up the
screen as shown next.