LevelOne GES-1652 - Manual (Page 56)

Web Smart Switch
56
Internal Path
Cost
It displays the internal path cost of the choosed port.
Port Priority It displays the port priority you have set.
Port Role It displays the port role of the choosed port.
Port State It displays the port state of the choosed port.
3.4 Security
3.4.1 Storm Control
The following table describes the labels in this screen.
LABEL DESCRIPTION
Port Select the port(s) which will use storm control.
Storm Type Select the type of packets to be limited with the Storm Control feature.
 Broadcast: Broadcast packet
 Multicast: All multicast packet, include known and unknown multicast.,
 Unknown Unicast: Unknown unicast packet.
 Unknown Multicast: Unknown multicast packet.
State Select On to enable traffic storm control on the Switch.
Select Off to disable this feature.
Rate (pps) Type a packet per second (pps) rate between 0 and 1000000. This is the
maximum amount of packets of the type selected previously that are allowed
to be transferred to the Switch per second. Any subsequent packets are
discarded.