LevelOne EAP-200 - Manual (Page 25)

25
to begin the next step.
Step 2: Configure Security Settings for your VAP
The following instructions will guide the user to set up wireless security with a specific VAP. If only
restricted access of certain MAC addresses is desired, skip to the Step3. MAC restriction can be
coupled with wireless security to provide extra protection.
First, click on the corresponding cell in the column labeled Security Type. This hyperlink will direct the
user to the following Security Settings page.
Security Settings Page (VAP-1 as shown for example)
Select the desired Security Type from the drop-down menu, which includes None, WEP, 802.1X,
WPA-PSK, and WPA-RADIUS.