LevelOne EAP-200 - Manual (Page 45)

45
Section 7.02 7.2 Wireless
This section includes the following functions: VAP Overview, General, VAP Configuration, Security,
Repeater, Advanced, Access Control, and Site Survey. EAP-200 supports up to eight Virtual Access
Points (VAPs). Each VAP can have its own settings (e.g. ESSID, VLAN ID, security settings, etc.). With
such VAP capabilities, different levels of service can be configured to meet network requirements.
(a) 7.2.1 VAP Overview
An overall status is collected on this page, including ESSID, State, Security Type, MAC ACL, and
Advanced Settings, where EAP-200 features 8 VAPs with respective settings. In this table, please click
on the hyperlink to further configure each individual VAP.
VAP Overview Page