LevelOne EAP-200 - Manual (Page 8)

8
LED Panel
EAP-200 LED Panel
1 Power LED LED ON indicates power on; OFF indicates power off.
2 LAN LED LED ON indicates LAN cable connected; OFF indicates no connection; BLINKING
indicates transmitting data.
3 WLAN LED LED ON indicates wireless ready.
4 WDS LED LED ON indicates WDS ready.
5 WES LED To indicate WES status.
Master Slave
WES Start
LED (Green) OFF and then
BLINKING SLOWLY
LED (Red) OFF and then
BLINKING SLOWLY
WES Negotiate
BLINKING NORMALLY
(Green)
BLINKING NORMALLY
(Red)
WES Negotiate Timeout LED (Green) ON LED (Red) ON
WES Success LED (Red) ON LED (Green) ON
WES Fail LED (Green) ON LED (Red) ON
6 USB LED Disabled for future usage only.