LevelOne EAP-200 - Manual (Page 7)

7
Section 2.03 2.3 Hardware Description
This section depicts the hardware information including all panel description.
Connector Panel
EAP-200 Connector Panel
1 USB Disabled for future usage only.
2 WES Press to start running WES process.
3 Console Attach the serial cable here.
4 LAN1 / LAN2 Attach the Ethernet cable here for connection with wired local networks.
5 Reset Hardware reset button, press once to reset to the system.
6 DC 12V Attach the power socket here.
7 12V Attach the power adapter here.
Antenna Panel
EAP-200 Antenna Panel
Antenna Connector: Attach the antennas here. The system supports one RF interface
with two SMA connectors.