LevelOne EAP-200 - Manual (Page 30)

30
Step 3: Configuring MAC ACL (Access Control List)
Clicking on the hyperlink corresponding with intended VAP in the MAC ACL column, the user will be
brought to the Access Control Settings page.
Access Control Settings Page
Please choose among Disable, Allow, Deny, and RADIUS ACL from the drop-down menu of Access
Control Type.
1) Disable Access Control: This means that there is no restriction for client devices to access the
system.
2) MAC ACL Allow List: This means that only the client devices (identified by their MAC addresses)
listed in the Allow List (“allowed MAC addresses”) is granted with access to the system. The
administrator can temporarily block any allowed MAC address by checking Disable, until the
administrator renews the listed MAC.
MAC ACL Allow List
An empty Allow List means that there are no allowed MAC addresses. Make sure at least the MAC of
the modifying system is included (e.g. network administrator’s computer)
3) MAC ACL Deny List: This means that all client devices are granted with access to the system
except those listed in the Deny List (“denied MAC addresses”). The administrator can allow any
denied MAC address to connect to the system temporarily by checking Enable.