System requirements, How to login the web-based interface – LevelOne WAB-6120 User Manual
Page 25
Chapter 3 Basic Settings Page 15
Encryption
None
Wireless Separation
Disable
Access Control
Disable
SNMP
Enable/Disable
Enable
Read Community Name
Public
Write Community Name
Private
IP Address
0.0.0.0
System Requirements
Before configuration, please make sure your system meets the following requirements:
A computer coupled with 10/ 100 Base-TX adapter;
Configure the computer with a static IP address of 192.168.1.x, as the default IP address of
LEVELONE 150MBPS WIRELESS POE AP is 192.168.1.1. (X cannot be 0, 1, nor 255);
A Web browser on PC for configuration such as Microsoft Internet Explorer 6.0 or above,
Netscape or Firefox.
How to Login the Web-based Interface
The LEVELONE 150MBPS WIRELESS POE AP provides you with user-friendly Web-based
management tool.
Open Web browser and enter the IP address (Default: 192.168.1.1) of LEVELONE 150MBPS
WIRELESS POE AP into the address field. You will see the login page as below.
Figure 12 Login Page