LevelOne WAB-6120 - Manual (Page 36)

Chapter 3 Basic Settings Page 26
Basic Wireless Settings
Open “Basic Settings” in “Wireless” as below to make basic wireless configuration.
Figure 16 Basic Wireless Settings
Disable Wireless LAN Interface
Check this option to disable WLAN interface, then the wireless module of LEVELONE 150MBPS
WIRELESS POE AP will stop working and no wireless device can connect to it.
Wireless Mode
Four operating modes are available on LEVELONE 150MBPS WIRELESS POE AP.
Wireless Client: The LEVELONE 150MBPS WIRELESS POE AP is able to connect to the AP
and thus join the wireless network around it.
AP: The LEVELONE 150MBPS WIRELESS POE AP establishes a wireless coverage and
receives connectivity from other wireless devices.
Bridge: The LEVELONE 150MBPS WIRELESS POE AP establishes wireless connectivity with
other APs by keying in remote MAC address. Please refer to the “WDS Setting” for detailed
configuration.
AP Repeater: The LEVELONE 150MBPS WIRELESS POE AP servers as AP and Bridge
concurrently. In other words, the LEVELONE 150MBPS WIRELESS POE AP can provide
connectivity services for CPEs under WDS mode.
Wireless Network Name (SSID)