LevelOne WAB-6120 User Manual

Page 42

Advertising
background image

Chapter 4 Advanced Settings Page 32

Link Integration

Available under AP/Bridge/AP repeater mode, it monitors the connection on the Ethernet port by

checking “Enabled”. It can inform the associating wireless clients as soon as the disconnection

occurs.

Max. Station Num

Available only under AP mode, it defines the maximum amount of wireless clients allowed to be

connected.

Space in Meter/ACK Timeout

To decrease the chances of data retransmission at long distance, the LEVELONE 150MBPS

WIRELESS POE AP can automatically adjust proper ACK timeout value by specifying distance of

the two nodes.

Flow Control

It allows the administrator to specify the incoming and outgoing traffic limit by checking “Enable

Traffic Shaping”. This is only available in Router mode.

We strongly recommend you leave most advanced settings at their defaults except

“Distance in Meters” adjusted the parameter for real distance; any modification on them

may negatively impact the performance of your wireless network.

Note:

Advertising