LevelOne WAB-6120 - Manual (Page 60)

Chapter 7 Troubleshooting Page 50
•
Check whether the IP address of PC is correct (in the same network segment as the unit);
•
Login the unit via other browsers such as Firefox.
•
Hardware reset the unit.
Q 5. What if the wireless connection is not stable after associating with an AP under wireless
client mode?
•
Since the LEVELONE 150MBPS WIRELESS POE AP comes with a built-in directional
antenna, it is recommended make the LEVELONE 150MBPS WIRELESS POE AP face to the
direction where the AP is to get the best connection quality.
•
In addition, you can start “Site Survey” in “Wireless Basic Settings” to check the signal
strength. If it is weak or unstable (The smaller the number is, the weaker the signal strength
is.), please join other available AP for better connection.