Teledyne LeCroy CANbus TD and CANbus TDM - Operators Manual - Manual (Page 7)

Operator's Manual
CANbus-TD-TDM-OM-E RevB 7
protocol format (as necessary) and decoding. These can be accessed from the Analysis
menu.
3. Decode Protocol Selections - As serial decode options are added to your oscilloscope,
additional protocol selections are available in a pop-up dialog box within the Serial
Decode dialog boxes.
Note: SIOP and SSPI are part of the SPIbus TD package. RS232 is part of the UART-
RS232bus TD package.
The TDM Series Software
The TDP option adds the following capability to the LeCroy oscilloscope software user interface
dialogs:
1. Serial Trigger Selection - If this is the first serial trigger option you have installed on your
oscilloscope, an additional icon is shown on your trigger dialog box. It allows a serial