When using the remote control – Alpine IVA-D310 User Manual

Page 63

Advertising
background image

61

-EN

01GB06IVA310.fm

ALPINE IVA-D310 68-02278Z28-A (EN)

/

Button

SEARCH Button: Not used.

button

Performs stop.

MENU Button

CLR Button

Removes numbers (one character at a time) that have been
selected and input.
Press and hold for 2 seconds. All the characters which were
selected and input are erased.

DISP/TOP M. Button

SETUP Button

Not used.

AUDIO Button

DVD/Video CD mode: Switches audio.

BAND Button

A.PROC Button

Press the button to call the Bass engine setting screen.

MUTE Button

Lowers the volume by 20 dB instantly. Press the button
again to cancel.
By pressing the button for more than 2 seconds, the monitor
opens or closes.

UP Button

, , ,

ENT. Button

Enters the selected item.

button

Numeric Keypad

Inputs numbers.

MONITOR Button

Not used.

ANGLE Button

SUBTITLE button

The SETUP operation of the unit cannot be carried out from the

remote control.

Some operations may not be possible depending on the disc.

When Using the Remote Control

• Point the remote control at the remote sensor within

about 2 meters.

• It may not be possible to operate the remote control if

the remote control sensor is exposed to direct
sunlight.

• The remote control is a small, lightweight precision

device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive

shock.

- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.

DVD/Video CD: • Move to the desired position on the disc.

• During playback, press and hold for

more than 1 second to reverse the disc
at double speed. Hold for more than 5
seconds to reverse the disc at 8 times
the normal speed.

DVD mode:

• When pressed and held in while in the

pause mode, the disc is played in
reverse slow motion at 1/8th the normal
speed. When held in for 5 more
seconds, the reverse slow motion speed
switches to 1/2 the normal speed.

• The picture is reversed by one frame

each time the button is pressed in the
pause mode.

Radio mode: Chooses the tuning mode.

By pressing it more than 2 seconds,
Automatic Memory will be operated.

Disc mode:

Switches between play and pause.

DVD/Video CD:

Pressing once stops the PRE stop; Pressing
twice sets stop.

DVD mode:

Shows the menu display.

Video CD mode:

Turns PBC ON or OFF. (for Video CD with
PBC functions)

DVD/Video CD mode:

Shows playback status.

DVD mode:

By pressing more than 2 seconds, shows the
top menu display.

Radio mode: Changes the band.

Changer mode:

Switches the disc mode.
(when an optional KCA-410C is connected)

Radio mode: Selects, in ascending order, stations

programmed into the radio’s presets.

MP3/WMA mode:

Folder Select (UP) Button to selects the
folder.

Changer mode:

DISC Select (UP) Button selects a disc in
ascending order.

DVD mode:

Selects an item displayed in the screen.

Radio mode: SEEK (UP) button

CD/Changer mode:

Press the button to advance to the beginning
of the next track. Press and hold to fast
forward.

MP3/WMA mode:

Press the button to advance to the beginning
of the next file. Press and hold to fast
forward.

DVD/Video CD:

• Move to the desired position on the disc.
• During playback, press and hold for more

than 1 second to forward the disc at
double speed. Hold for more than 5
seconds to forward the disc at 8 times the
normal speed.

• When pressed and held in while in the

pause mode, the disc is played in slow
motion at 1/8th the normal speed. When
held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal
speed.

• The picture is forwarded by one frame

each time the button is pressed in the
pause mode.

DVD mode:

Switches the angle of the picture.

DVD mode:

Switches the subtitle.

01GB00IVAD310.book Page 61 Wednesday, December 1, 2004 4:20 AM

Advertising