Vanguard TRM-20_40 - Manual (Page 53)

REV 1 TRM-20 AND TRM-40 USER’S MANUAL
49
m. The following screen will be displayed:
1. YES
Press the [1] key (YES) to save the test record. Continue to step m.
2. NO
Press the [2] key (NO) if you do not want to save the test record. The following
screen will be displayed:
Press the
[1]
key (DO NOT SAVE RECORD) if you do not want to save the record.
You will be returned to the “START-UP” menu.
Press the
[2]
key (SAVE RECORD) to save the record. Continue to step m.
n. The following screen will be displayed:
NOTES
• The record number is automatically assigned and incremented by the TRM.
• Once the test record has been saved, it can be recalled and printed (3.15.3
and 3.15.4 for further information). Figure 7 shows a typical Special Test
report printout.
Press any key to return to the “START-UP” menu.
record number 03
has been saved!
ARE YOU SURE?
DATA WILL BE LOST!
3. DO NOT SAVE RECORD
4. SAVE RECORD
SAVE THIS RECORD?
1. YES
2. NO