Vanguard TRM-20_40 - Manual (Page 72)

TRM-20 AND TRM-40 USER’S MANUAL REV 1
68
3.15.4. Restoring a Test Record From a USB Flash Drive
Use the steps below to restore a test record from a USB Flash drive to the TRM’s working
memory:
a. Make sure the USB Flash drive containing the test record(s) is inserted in the TRM’s USB
Flash drive port (“USB MEM” port). Then start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the
[3]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
Press the
[1]
key (RESTORE RECORD)
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY TO THUMB DRIVE
1. RECORD ID
2. PRINT RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1. RUN TEST
2. SETUP
3. USER DIAGNOSTICS
11/10/11
12:13:15
22 °C 72°F