Vanguard TRM-20_40 - Manual (Page 82)

TRM-20 AND TRM-40 USER’S MANUAL REV 1
78
3.16 Erasing Test Records from a USB Flash Drive
Follow the steps below to erase test records from a USB Flash drive:
a. Make sure a USB Flash drive is connected to the unit’s “USB MEM” port, and then start
from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [3] key (RESTORE RECORD).
c. The following screen will be displayed:
Press the
[4]
key (ERASE RECORD).
d. The following screen will be displayed:
Press the
[2]
key (ERASE THUMB DRV REC).
1. ERASE INTERNAL REC
2. ERASE THUMB DRV REC
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY TO THUMB DRIVE
1. RECORD ID
2. PRINT RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1. RUN TEST
2. SETUP
3. USER DIAGNOSTICS
11/10/11
12:13:15
22 °C 72°F