WARN PullzAll SERVICE GUIDE 885005 & 885006 - Manual (Page 15)

987606A1.doc Page 15 of 46
5. Keep the assembly on the work bench
facing the cover in the direction shown in
the figure.
6. Install 6 screws (#8 X 1.25) from the
main body of the Housing.
7. Install 6 screws (#6 x .75) in Handle.
Note:
When replacing the Housings with a Housing Service kit, be sure to affix ALL
appropriate labels from the service kit onto the new housings, using the housings
being replaced as a guide for placement of your new labels. Your service kit will
include extra labels for other languages and markets that can be discarded after you
select the ones needed for your product.