WARN PullzAll SERVICE GUIDE 885005 & 885006 - Manual (Page 9)

987606A1.doc Page 9 of 46
2.2.2 ASSEMBLY OF BATTERY
1. Hold the PullzAll in the position as shown in
figure. Slide the Battery pack into the body as
shown direction
2. Slide Battery pack completely into the
PullzAll body; make sure that the latch is
fully engaged.
The PullzAll Battery uses NiMH technology. Generally, they can be disposed of in a municipal
waste stream. However, check your local ordinances for disposal or recycling regulations.