WARN PullzAll SERVICE GUIDE 885005 & 885006 User Manual
Page 22
Advertising
987606A1.doc
Page 22 of 46
4. Insert the Wire Rope into the Drum
through the Hawse Fairlead.
5. Pull the wire from the other end of the
Drum hole.
6. Bend the Wire Rope and insert in to the
same hole in the direction shown in the
figure.
7. Pull the Wire Rope from the hole as
shown in the figure.
Advertising
See also other documents in the category WARN For the car:
- ZEON 8-S (36 pages)
- ZEON 8-S Synthetic Rope (50 pages)
- ZEON 10-S Multi-Mount (12 pages)
- ZEON 10-S Multi-Mount (6 pages)
- OLYMPUS 25 S-9X12-M-BLK (2 pages)
- OLYMPUS 25 S-9X12-M-POL (2 pages)
- 15-S Series Spydura Pro (2 pages)
- 15-S Series Spydura ProMax (2 pages)
- S-12 Series Spydura Pro (2 pages)
- S-12 Series Spydura ProMax (2 pages)
- S-9 Series Spydura Pro (2 pages)
- S-9 Series Spydura ProMax (2 pages)
- Severe Duty 9L 63123 (2 pages)
- Severe Duty 9L 88540 (2 pages)
- Severe Duty 12 (2 pages)
- Severe Duty 18 (2 pages)
- OLYMPUS 22 22W-8X8-A-CRC (2 pages)
- PullzAll Installation (32 pages)
- PullzAll BATTERY CHARGER (36 pages)
- PullzAll SERVICE GUIDE 685005, 685006 & 685007 (45 pages)
- Vantage 2000 (36 pages)
- M12000 (20 pages)
- 16.5ti (20 pages)
- 20XL-LP Series (16 pages)
- 30XL-LP 81617 (2 pages)
- 30XL 82710 (2 pages)
- 9 DC Series 12V (2 pages)
- 9 DC Series 24V (2 pages)
- 12 DC Series 12V (2 pages)
- 12 DC Series 24V (2 pages)
- 15 DC Series 12V (2 pages)
- 15 DC Series 24V (2 pages)
- 18 DC Series (2 pages)
- 6 Series Hydraulic (Anti-clockwise) (2 pages)
- 9 Series Hydraulic (Anti-clockwise, 4.9 cu in motor) (2 pages)
- 9 Series Hydraulic (Clockwise, 4.9 cu in motor) (2 pages)
- 9 Series Hydraulic (3.0 cu in motor) (2 pages)
- 9 Series Hydraulic Round Top (2 pages)
- 12 Series Hydraulic (Anti-clockwise) (2 pages)
- 12 Series Hydraulic Round Top (2 pages)
- 15 Series Hydraulic (2 pages)
- 18 Series Hydraulic (2 pages)
- WG9 WINCH (Standard Drum) (2 pages)
- WG9 WINCH (Long Drum) with manual clutch (2 pages)