WARN PullzAll SERVICE GUIDE 885005 & 885006 - Manual (Page 24)

987606A1.doc Page 24 of 46
11. Check the Wire Rope so that it enters
completely into the Drum hole.
12. Check from the other side of the Drum
whether the Wire Rope is perfectly
assembled to the Drum.
2.5.3 INSPECTION OF WIRE ROPE
• Inspect the Wire Rope for signs of wear or damage. Worn and damaged parts must be
replaced.
• See the Rope for damage for kinks, cuts, knots, mashed or frayed portions and broken
strands.
• Keep the Rope free from contaminants. Use a clean towel to remove the dirt and debris.
• Use of light oil on the Wire Rope can prevent corrosion.