Warner Electric XCTRL-2DRV - Manual (Page 10)

10 Warner Electric • +33 (0) 2 41 21 24 24 P-2097-WE-A4
8. (Optional) Manual Calibration
The manual calibration of the XCTRL controller allows you to calibrate
the sensor Input (Cell1/Cell2) and the auxiliary sensor input (Ana1/Ana2)
without the XCTRL Configurator application. The calibrated values will
be then applied to the partition selected by P1, P2, P3 inputs.
Use the button above the green LED to start the calibration and follow
the procedure. A long press corresponds to 5s and a time out is equal
to 10s.
Procedure: