Xctrl firmware update – Warner Electric XCTRL-2DRV User Manual
Page 32
32 Warner Electric • +33 (0) 2 41 21 24 24
P-2097-WE-A4
10. XCTRL Firmware Update
When necessary , it’s possible to update the firmware of the XCtrl controller with using the XCtrl configurator
application. To do so, please follow the below steps:
1) Click on ‘XCTRL’ in the main menu, then on ‘Update Firmware’.
2) A Login window pops up.
3) Please enter the following login and password: (Please contact Warner to get it), (Please contact Warner
to get it). Both login and password are case sensitive. They need to be entered in Uppercase.
4) Click on the ‘OK’ button. A Bootloader agent is starting.
5) Click on the ‘Open Hex File’ push button and select the new firmware file
6) Click on ‘Program device’ button
7) Reset the XCtrl by clicking on ‘Reset Device’ button