Warner Electric XCTRL-2DRV - Manual (Page 8)

8 Warner Electric • +33 (0) 2 41 21 24 24 P-2097-WE-A4
Dancer Arm Application:
Figure 5: Dancer Arm Application
3. Dancer Arm Wiring
Wire Dancer Arm BTCS605-E2 or BTCS 620 to the controller as describe below, use channel 1 or 2. For all
generalist wiring refer to figure 2 above. Please refer to the paragraph Input Selection and Setting to setup
the XCTRL accordingly.
Figure 6: Dancer Arm Wiring
4. Load Cell Wiring
Wire Load Cell (not amplified or amplified) to the controller as describe below, use channel 1 and/or 2. For all
generalist wiring refer to figure 2 above.
Figure 7: Not Amplified Load Cell Wiring Figure 8: Amplified Load Cell Wiring
Note: For all load cell wiring please refer to the corresponding Datasheet