Warner Electric XCTRL-2DRV - Manual (Page 27)

Warner Electric • +33 (0) 2 41 21 24 24 P-2097-WE-A4 27
• Auxiliary Analog Input Type
Select between 0-10Vdc or 4-20mA
Note: Tick this box to invert the Analog Input
• Auxiliary sensor calibration
For a good behavior, it’s a mandatory to calibrate the voltage/current span of these inputs. Please follow the
below procedure to do so:
1) Put the Auxiliary sensor to Min, press Min on the software:
Min is learnt
2) Put the Auxiliary sensor to Max, press Max on the software:
Max is learnt