IEI Integration PCIE-Q350 v1.30 - Manual (Page 109)

PCIE-Q350 PICMG 1.3 CPU Card
Page 89
Figure 5-17: LAN Connection
Step 3: Insert the LAN cable to the RJ-45 connector. Once aligned, gently insert the
LAN cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
5.9.2 USB Device Connection (Single Connector)
There are two external USB 2.0 connectors. Both connectors are perpendicular to the
PCIE-Q350. To connect a USB 2.0 or USB 1.1 device, please follow the instructions
below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the PCIE-Q350. See Figure 5-18.