IEI Integration PCIE-Q350 v1.30 - Manual (Page 90)

PCIE-Q350 PICMG 1.3 CPU Card
Page 70
WARNING:
When handling the CPU, only hold it on the sides. DO NOT touch the
pins at the bottom of the CPU.
Step 1: Remove the protective cover. Remove the black protective cover by prying it
off the load plate. To remove the protective cover, locate the “REMOVE” sign
and use your fingernail to pry the protective cover off. See Figure 5-2.
Figure 5-2: Remove the CPU Socket Protective Shield
Step 2: Open the socket. Disengage the load lever by pressing the lever down and
slightly outward to clear the retention tab. Rotate the load lever to a fully open
position. Then rotate the load plate towards the opposite direction.
See Figure 5-3.