3 dimm installation – IEI Integration PCIE-Q350 v1.30 User Manual
Page 94
Advertising
PCIE-Q350 PICMG 1.3 CPU Card
Page 74
Figure 5-6: Securing the Heat sink to the PCB Board
Step 5:
Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each
nut a few turns at a time and do not over-tighten the screws.
Step 6:
Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the PCIE-Q350. Carefully route the cable and avoid heat generating chips
and fan blades.
Step 0:
5.4.3 DIMM Installation
WARNING:
Using incorrectly specified DIMM may cause permanently damage the
PCIE-Q350. Please make sure the purchased DIMM complies with the
memory specifications of the PCIE-Q350. DIMM specifications
compliant with the PCIE-Q350 are listed in Chapter 2.
Advertising