Figure 5-3: open the cpu socket load plate – IEI Integration PCIE-Q350 v1.30 User Manual
Page 91
PCIE-Q350 PICMG 1.3 CPU Card
Page 71
Figure 5-3: Open the CPU Socket Load Plate
Step 3:
Inspect the CPU socket Make sure there are no bent pins and make sure the
socket contacts are free of foreign material. If any debris is found, remove it with
compressed air.
Step 4:
Orientate the CPU properly. Make sure the IHS (Integrated Heat Sink) side is
facing upward.
Step 5:
Correctly position the CPU. Match the Pin 1 mark with the cut edge on the
CPU socket.
Step 6:
Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.
Carefully match the two orientation notches on the CPU with the socket
alignment keys.
Step 7:
Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are
properly aligned, the CPU should slide into the CPU socket smoothly.
See Figure 5-4.