IEI Integration PCISA-PV-D4251_N4551_D5251 - Manual (Page 65)

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 52
Figure 4-8: PCIe Slot Jumper Location
4.5 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.
4.5.1 SATA Drive Connection
The PCISA-PV-D4251/N4551/D5251 is shipped with three SATA drive cables. To connect
the SATA drives to the connectors, please follow the steps below.
Step 1: Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2: Insert the cable connector. Press the clip on the connector at the end of the
SATA cable and insert the cable connector into the on-board SATA drive
connector. See Figure 4-9.