IEI Integration PCISA-PV-D4251_N4551_D5251 - Manual (Page 67)

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 54
Figure 4-10: SATA Power Drive Connection
4.5.2 USB Cable (Dual Port) with Slot Bracket
The PCISA-PV-D4251/N4551/D5251 is shipped with a dual port USB 2.0 cable. To
connect the USB cable connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1of
the cable connector with pin 1 on the PCISA-PV-D4251/N4551/D5251 USB
connector.