IEI Integration PCISA-PV-D4251_N4551_D5251 - Manual (Page 69)

PCISA-PV-D4251/N4551/D5251 CPU Card
Page 56
Step 1: Locate the RJ-45 connectors. The locations of the RJ45 connectors are
shown in Chapter 3.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the PCISA-PV-D4251/N4551/D5251. See Figure 4-12.
Figure 4-12: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
4.6.2 USB Device Connection
There are two external USB 2.0 connectors. To connect a USB 2.0 or USB 1.1 device,
please follow the instructions below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in Chapter 3.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the PCISA-PV-D4251/N4551/D5251. See Figure 4-13.