IEI Integration ICE-DB-T6 - Manual (Page 93)

Type 6 Carrier Board Design Guide
Page 83
chassis ground through the heat sink andor heatspreader. System designers should take
this into account when defining system grounding.
5.7 Others Kits Specification
5.7.1 Cooling Kit
IEI provides a standard cooling kit specially designed for the COM Express Type 6
modules. The cooling kit includes a heatspreader plate and a heat sink. The cooling kit
dimensions and photos are shown below.
Figure 5-11: IEI Heat Sink Module Dimensions
Heatsink Heatspreader Plate
Figure 5-12: IEI Heat Sink Module Picture