2 keyboard/mouse connector, Figure 4-11: audio kit cable connection – IEI Integration KINO-GM45A User Manual
Page 70
KINO-GM45A Mini-ITX SBC
Page 58
Step 2:
Align pin 1. Align pin 1 on the on-board connector with pin 1 on the audio kit
connector. Pin 1 on the audio kit connector is indicated with a white dot. See
Figure 4-11: Audio Kit Cable Connection
Step 3:
Connect the audio devices. Connect speakers to the line-out audio jack.
Connect the output of an audio device to the line-in audio jack. Connect a
microphone to the mic-in audio jack.
Step 0:
4.7.2 Keyboard/Mouse Connector
The KINO-GM45A is shipped with a keyboard/mouse Y-cable connector. The
keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the
KINO-GM45A and branches into two cables that are each connected to a PS/2 connector,
one for a mouse and one for a keyboard. To connect the keyboard/mouse Y-cable
connector please follow the steps below.
Step 1:
Locate the connector. The location of the keyboard/mouse Y-cable connector
is shown in Chapter 3.