IEI Integration KINO-GM45A - Manual (Page 71)

KINO-GM45A Mini-ITX SBC
Page 59
Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the KINO-GM45A keyboard/mouse connector. See Figure 4-12.
Step 3: Insert the cable connectors . Once the cable connector is properly aligned with
the keyboard/mouse connector on the KINO-GM45A, connect the cable
connector to the on-board connectors. See Figure 4-12.
Figure 4-12: Keyboard/mouse Y-cable Connection
Step 4: Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable
connector is connected to two PS/2 connectors. To secure the PS/2 connectors
to the chassis please refer to the installation instructions that came with the
chassis.
Step 5: Connect the keyboard and mouse. Once the PS/2 connectors are connected
to the chassis, a keyboard and mouse can each be connected to one of the
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are