IEI Integration KINO-GM45A - Manual (Page 75)

KINO-GM45A Mini-ITX SBC
Page 63
Figure 4-15: USB Connector
4.8.3 VGA Monitor Connection
The KINO-GM45A has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the KINO-GM45A, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
KINO-GM45A. See
5
Figure 4-16.